-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
MIXMIC 2
User manual / Instrukcja obsługi
1
ENGLISH
A. SAFETY RULES
This symbol is intended to inform about important guidelines that apply to the operation
and maintenance of the device described in the following user manual. It is recommended
to read the user manual and keep it for future reference.
Warning! Do not disassemble the housing of the device – any attempt to do so may
result in electric shock! It is forbidden to repair the device by the user – making such repairs
will result in loss of warranty! Repairs may be performed only by an authorized service center!
Warning! It is forbidden to expose the product to water and moisture – allowing this
may risk electric shock or ignition of the device! Make every effort to ensure that no liquid
enters the device! Do not place objects filled with liquid on the device!
Warning! Maintenance of the device may be performed only by qualified technical per-
sonnel. Do not take any action on the device that is not based on the following operating user
manual – any other action than described risks electric shock!
Also respect the following rules:
keep the user manual for future reference,
respect all safety rules,
follow the user manual,
do not use the device in close proximity to water,
clean the device only with a dry cloth,
do not place the device near heat sources,
before each use, check the power cable for damage,
arrange the power cable in such a manner as to exclude the risk of damage,
do not connect a damaged power cable to the device,
use only the accessories originally supplied with the product,
when transporting the product on a cart, be careful to minimize the risk of tripping and
injury,
unplug the power cable from the device when it is not in use for a long time, as well
as during a storm,
do not turn on the device if it has malfunctioned,
do not use the device at maximum volume for a long time – this may lead to damage
to hearing and/or headphones and/or speakers.
2
B. STRUCTURE AND FEATURES
1. [MIC/LINE].
Mono input sockets, you can connect XLR plug and phone plug to connect the microphone
or instrument you want to use.
2. +48V Phantom power supply switch / indicator.
Press +48V Phantom power supply switch to begin supplying +48V Phantom power. The in-
dicator will light up when +48V Phantom power switch is turned on.
3. [PAD] switch.
Turning on this switch will attenuate the sound input to the device. Even if the [GAIN] knob
is adjusted to the far left, a distortion can still be heard or the [PEAK] LED lights up frequently,
3
turn on [PAD] switch. Note: before using [PAD] switch, adjust the level knob to minimum.
Otherwise, noise may be generated.
4. Main channel signal level indicator.
When it flashes green, it indicates that the signal is normal. When it flashes red, it indicates
that the signal has been distorted – the volume need to be reduced.
5. [MIC ON] switch.
Press it to connect the mixer with the wireless microphone (beforehand, start the micro-
phone/s with the power button). When the wireless microphone is connected, it will be indi-
cated by [A] LED indicator or [B] LED indicator.
6. [REC, 2-TK].
RCA (cinch) input / output for recording.
7. [MAIN OUT].
Main output sockets (6.35 mm jack), supporting balanced and unbalanced connection mode.
It is used to connect the mixer to an active loudspeaker or a power amplifier.
8. [3/L, 4/R].
RCA (cinch) interface of stereo input channel divided into [3/L] left and [4/R] right channel.
9. [GAIN] knob.
It adjusts the amplification factor of the signal to determine the basic volume of the channel.
10. [HIGH, MID, LOW] sliders.
They allow for pitch adjustment in high, mid and low range.
11. [FX] knob.
It is used to control the sound of the channel with built-in effector.
12. [LEVEL] knob.
It adjusts the volume of the channel 1 (or 2) signal input which is sent to the [MAIN OUT].
Note: The functions of [GAIN] and [LEVEL] knobs in case of stereo input channel are the
same as those of mono input channel.
13. [2-TK TO PHONES, 2-TK TO MIX] switches.
[2-TK TO PHONES] switches the signal output to [PHONE] output. [2-TK TO MIX] switches
the signal output to [MAIN OUT].
4
14. [USB LEVEL] knob.
It adjusts the volume of an USB. [TO MAIN] switch allows for sending the signal to [MAIN
OUT].
15. [MAIN LEVEL] knob.
It adjusts the volume of [MAIN OUT].
16. [MIC] input.
The 3.5 mm jack input for microphone / mobile device with [LEVEL] knob for volume control.
17. [PHONE] input.
The 3.5 mm jack input for headphones with [LEVEL] knob for volume control.
18. Bluetooth / MP3 player.
[ ] button: short press – select the previous song; long press – rewind
[ ] button: short press – select the next song; long press – fast-forward
[ ] button: short press – play / pause; long press – switch cycle mode
[MODE] button: short press – switch between USB playback / recording mode / Blue-
tooth mode. In recording mode: short press [ ] button to start / stop recording, short
press [MODE] button to replay the recording file and save it.
19. [3/4 LEVEL] knob.
It adjusts the volume of stereo 3/4 output. Next to it is a 3.5 mm jack input socket for head-
phones, mobile devices and other audio devices [AUX].
20. Power indicator.
21. USB input for a flash drive.
It allows you to play audio files from a flash drive using the built-in MP3 player.
22. [3/4, AUX IN] switch.
It allows for switching between stereo and [AUX] input. Next to it is a [PEAK] LED which will
light up when the input signal volume is too high – please reduce the volume.
23. USB-C, 5V/1A power socket.
24. External antennas.
