-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
BLUETOOTH SPEAKER
XS-E423B / XS-E423G
INSTRUCTION MANUAL
NÁVOD K POUŽITÍ
INSTRUKCJA OBSŁUGI
NÁVOD NA POUŽITIE
HASZNÁLATI UTASÍTÁS
MANUAL DE INSTRUCȚIUNI
РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ
EN
CZ
PL
SK
HU
RO
BG
EN
INTRODUCTION
Thank you for buying our product. Please read through these operating
instructions, so you will know how to operate your equipment properly.
After you nished reading the instructions manual, put it away in a safe
place for future reference.
IMPORTANT SAFETY PRECAUTIONS
When using your Speaker, basic safety precautions should always be
followed, including the following:
• Children should be supervised to ensure that they do not play with the
device.
• Keep this Speaker and its accessories away from excessive heat.
• No sharp object should be subjected to the speaker/speaker-drivers as it
may damage the speakers.
• Only use a soft cloth, no harsh abrasives or chemicals to clean, as it may
damage the surface finishing.
• Keep away from dripping or splashed fluids.
• Ensure the speaker is waterproof by removing all the connected cables
and the cap is tightly closed before exposing the speaker to liquid.
• NEVER expose the speaker to water while charging, as doing so may
result in damage to the speaker or the power source.
• NEVER operate this speaker with a damaged cable or after it has
malfunctioned or has been damaged in any manner.
• NEVER leave the speaker unattended while charging. If the speaker
becomes hot, smokes, or gives off an odor during charging, terminate
charging immediately.
TO AVOID DANGER OF SUFFOCATION, KEEP THE PLASTIC
BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE
THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS.
THIS BAG IS NOT A TOY.
PRODUCT OVERVIEW AND CONTROL BUTTONS
1. Volume control
2. Microphone
3. button
Long press to turn on/off the speaker.
Press 2 times to disconnect Bluetooth device.
Press 3 times to delete speaker’s Bluetooth connection history
information.
If the speaker does not work or respond, long press (25s) to reset the
speaker.
4. button
Press to switch LED light mode (10 different LED lights modes).
Long press to turn off/on LED light.
EN
5. AUX in / USB-CTM charging port
6. LED indicator / Touch control area
7. LED light
USB Type-CTM and USB-CTM are trademarks of USB Implementers Forum.
TOUCH CONTROL
• Short tap 1 time > Pause/Play music; Pick up/hang up call;
Mute/Unmute under AUX mode.
• Short tap 2 times > Next song.
• Short tap 3 times > Previous song.
• Long tap 2s: > Reject call.
• Long tap 4s > Switch EQ mode (3 different EQ modes).
NOTE: When a phone or other smartphone is connected to the speaker, follow the
steps above to make hands-free calls.
CHARGING
Before rst-time use, fully charge the built-in battery. The charger is not
included in the package, please charge the speaker via a standard
5 V / 2 A charger or via a PC. The LED indicator will glow red during
charging. The LED indicator turns o when the speaker is fully charged.
NOTE: The LED indicator will flash when the battery is low.
IMPORTANT: Please make a complete charge every three months to avoid
shortening the battery lifespan.
BLUETOOTH
• Long press the button to turn on the speaker. The LED indicator will
flash blue and hear a tone. The speaker is in pairing mode.
• Activate Bluetooth of mobile phone and search for device name
“XS-E423B” / “XS-E423G” then connect it. If the pairing is successful,
the LED indicator will be solid blue.
NOTE: The speaker will automatically shut down after 10 minutes in pairing mode if
no devices are paired. When the volume reaches the maximum level, you will hear a
“Beep” voice prompt.
Disconnecting the paired mobile phone
• Press the button twice to disconnect the current device.
The LED indicator will flash blue and the speaker will be in pairing mode.
TWS (TRUE WIRELESS STEREO)
The TWS technology enables you to use two speakers pairing via
Bluetooth to create a wireless dual-channel system to deliver true stereo
sound eect.
• Turn on both speakers. Make sure both speakers are without any
Bluetooth connection.
• Double press the button on one of the speakers, the second speaker
will connect automatically.
EN
• The first speaker LED indicator flashes blue and the LED indicator
of the second one keeps solid blue, which means both speakers are
connected successfully.
• Pair your mobile phone with the first speaker, the LED indicator of both
speakers will be solid blue.
Disconnect the TWS connection
Double press the button on one of the speakers to disconnect the TWS
pairing.
AUX IN
The speaker automatically switches to AUX IN mode when you connect
your device with the audio cable (included). When using an external
device, all functions can only be controlled by the external device.
NOTE: The LED indicator will be solid green after connection and during playback.
SPECIFICATION
BT Version 5.3
BT proles A2DP1.2 / AVRCP1.4
HFP1.6 / HSP1.2
BT connecting range 10 meters
BT Frequency 2402 - 2480 MHz
EIRP 2,06 dBm
DC input voltage/current 5V / 2A
Battery type Lithium-ion (3,7V / 4000mAh)
Battery Charging Time approx. 3 hours
Battery Playback Time 14 hours (50 % Volume)
Signal-to-noise ratio > 70 dB
Frequency response 70 Hz - 18 kHz
Rated Power 24 W (RMS)
IP code IPX5
Dimensions 78 x 78 x 202 mm
Weight 605 ± 10 g
Package Contents: Portable Bluetooth speaker, Charging cable, Audio
cable, User manual
We reserve the right to change technical specifications.
