Stereo Turntable with 2 External Speakers
ATT-240SP
INSTRUCTION MANUAL
IEN - ENGLISH E
2
Safety instructions
Read these safety instructions before using your device and store them for possible future reference.
If the charger cord is damaged, have it repaired by the Service or a similarly qualified person in
order to avoid any danger.
The power supply must be replaced by a new one in case of malfunction, because this power
supply is not repairable.
The device is not intended for use by persons (including children) with reduced physical, sensory or
mental capacity. Persons who have not read the manual, unless they have received explanations by
a person responsible for their safety and supervision should not use this unit. Children should be
monitored to ensure that they do not play with the unit.
The device should not be exposed to dripping or splashing water.
Always leave a minimum distance of 10 cm around the unit to ensure sufficient ventilation.
At full volume, prolonged listening to the portable audio device may damage the user’s hearing and
cause hearing troubles (temporary or permanent deafness, hyperacusis). So we recommend not to
use this portable audio device at high audio volume and no more than one hour per day at medium
audio volume.
Interference
All wireless devices are susceptible to interference which may affect their performance.
Switch the mobile device off where the use of mobile devices is not allowed or where there is a risk of
causing interference or danger, for example on board an aircraft, near medical equipment, fuel,
chemicals or blasting sites.
Children
Keep your device in a safe place, out of the reach of young children. The device contains small parts
that may present a choking hazard.
Packing Contents
1*Turntable with two external Speakers
1*Dust cover with 1 pair hinge
1*Adapter（12V,2A）
1*User manual
1*Warranty card
Functions:
3-speed (33 1/3, 45 and 78 RPM)
Two powerful 4-inch external speakers (2 X 10W)
High quality ceramic cartridge produces detailed sound
Belt driven turntable mechanism
Big platter with AUTO-STOP function
Play 7", 10" & 12" Records
Bluetooth function
USB playback and encoding;
Recording from PHONO/Bluetooth to USB drive
3
Product Description
4
1. Speaker
2. Dust Cover
3. Main body
4. Volume control knob
5. Indicator light
6. Platter
7. Transit screw crossing
8. Lift lever
9. Tonearm lock
10. Speed selector (33 1/3, 45 and 78 RPM )
11. Tonearm
12. Cartridge with Stylus
13. 45 RPM adaptor
14. Previous track
15. Next track
16. Play/Pause, Power on/off, Delete button
17. Mode button: Bluetooth/PHONO, Recording
18. USB port (The max support 2.0 USB drive of 32GB)
19. DC power jack (12V, 2A)
20. Speaker out jack-Left channel
21. Speaker out jack-Right channel
Fitting the dust cover
Please refer to the following instructions:
1. Install the hinge clamp in the position of the dust cover slot
in the correct direction (Hinges are in the attachment).
2. Then install the dust cover on the turntable, note the hinge
clamp should be aligned with the hinge base on the turntable.
Take care when fitting, and do not press down too hard
Unpacking and setup
1. Carefully remove the turntable from the package and remove all packing material.
2. Unwind the AC adapter power cord and extend it to its full length.
3. Place the turntable on a stable, level surface in proximity to an AC outlet and away from any strong
magnetic fields.
4. Plug the power cord into your AC outlet.
5. Remove the opaque white plastic stylus cover from the phonograph stylus by sliding it in the
direction of the arrow.
6. Be cautious and gentle when removing this stylus cover, as damage to the stylus is not covered by
warranty.
7. Remove the twist-tie securing the tonearm during the shipment.
8. Release the tone arm lever lock.
IMPORTANT!
TRANSPORTING THE SYSTEM
1. To protect the turntable from damage during transportation, a silver transit screw is located on the
upper right of the turntable platform.
5
2. Before playing, please use a
screwdriver to turn the transit
screw in a clockwise direction
(screw going down) completely
to unlock the turntable.
3. To lock the turntable again for
transportation, please turn the
screw in a counter-clockwise
direction.
Initial Set -up
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit
is ready to be connected to a mains voltage of 12V 2A DC adaptor.
EXTERNAL SPEAKER CONNECTION
The external speaker connects to the speaker out socket (SPK OUT) of the turntable.
Black plug into R/L channel input.
Playing Records
Important: To avoid stylus damage, make sure the included stylus guard is in place whenever the
turntable is being installed, moved and cleaned.
Turn on the unit and adjust the volume to an appropriate level.
Press the Mode button to the PHONO function (Default startup mode is Bluetooth).
Please be sure that you have removed the stylus cover from the stylus and have released the
tonearm lock.
Select the speed required using the speed selector switch.
Push the Lift Lever up to raise the tonearm and then gently move the tonearm to the desired
position over the record. The platter will begin to spin when the tonearm is moved toward the
record. Push the Lift Lever forward to lower the tonearm slowly onto the desired position on the
record. The record will begin playing.
When the record is finished, push the Lift Lever backwards to raise the tonearm and gently move it
back to its rest position.
When you have finished playing records, engage the tonearm lock to protect it from accidental
movement. Unplug it from the power supply if it is not going to be used for a while.
NOTE:
1. This unit is designed with AUTO STOP function for the PHONO. The vinyl record will stop
automatically when it plays to the end.
2. AUTO STOP function applies to most 33 1/3 RPM vinyl records. Some vinyl records, e.g. 45RPM, will
stop before playback comes to the end.