Znaleziono w kategoriach:
Aparaty cyfrowe (10)
Wróć
www.support.agfaphoto-gtc.com
User manual
Manuel d’utilisation
Bedienungsanleitung
Manual de usuario
Manuale d’uso
Manual do usuário
Gebruikershandleiding
Podreecznik uzytkownika
Uživatelský manuál
Felhasználói kézikönyv
Vlogging Camera Bundle
Realishot VLG-4K
EN
2
SAFETY NOTES
CAMERA :
• Please do not insert other objects into the
camera’s card slot except the microSD card.
• When the camera is powered on for just few
seconds, the image on display maybe not be
stable. It is normal, not camera failure.
• Due to the optical performance of the lens, color
dispersion may occur at the edge of the image.
It is normal, not camera failure.
• The microSD card will get hot after using for a
long time. It is normal, not camera failure.
• The camera's screen heats up after using the
camera for a long time. It is normal, not camera
failure.
• The camera does not have an auto focus
function. To get the best picture, it is suggested
to take a photo two meters away from the object.
• If the camera is not to be used for a long time,
please take out the battery and put them in s
dust-free and dry environment which temperature
is less than 30°C.
• To make sure long battery life, please make sure
the battery is fully discharged before storage.
• Please make sure the battery is charged and
discharged at least one time every 3 months.
• If there is dust or dirt on the lens or display,
please use a clean and soft lens cleaning cloth to
wipe it softly.
• The camera is precise instrument, please prevent
it from falling, knocking shaking, etc.
• Do not expose the unit to bumps, vibration,
dust, or extreme humidity. This could lead
to malfunctions, short circuits or damage to
batteries and components.
• Do not expose the unit to direct sunlight, flames
or high temperatures.
• Do not expose the unit to dripping water
or splashes
• Do not use the unit if it does not operate
normally.
• Do not repair the unit yourself. Only allow repairs
to be carried out by a qualified person.
• This unit has been designed for domestic use
only.
• The unit may only be used as described in this
manual.
TRIPOD :
• Do not connect the output interface on the
tripod with the input interface on the tripod
• Do not use this product in high temperature
or humid environment.
• Do not dip the product into corrosive liquids.
Please avoid impact, extrusion or fire.
• Do not disassemble this product.
• If the tripod haven’t been used for a long time,
it is recommended to discharge and fully charge
the tripod every 3 months.
MICROPHONE :
• The microphone equipped with a professional
condenser microphone core with high
sensitivity, which needs to be protect from fall-
off and strong strike.
• Keep the microphone in a dry and clean place if
the microphone is not used for a long time.
• When the microphone stops working, please
turn the power switch to “OFF” to save battery
power. When it is not used for a long time,
please remove the battery to prevent battery
leakage and damage to the circuit.
• When the power is low, please replace the
battery in time.
•T o achieve good sound reception effect, please
install the equipped windproof cover.
EN
3
CAMERA
1. Lens
2. External lens interface
3. Flash extend switch
4. Display
5. Display On/Off button
6. Menu button
7. Timer/Left button
8. Delete/Down button
9. Playback/Right button
10. Flash/Up button
11. Mode/OK button
12. Zoom out button
13. Zoom in button
14. Macro button
15. Shutter button
16. Power button
17. Battery door release
18. Tripod mount socket
19. USB port cover
1
2
3
4
18
17
14
19
15
16
13 12
6
7
8
10
11
9
5
EN
4
HOW TO USE YOUR CAMERA
1. To open the Battery Door
Unlock the battery door by sliding the battery
door notch away from the opening. Use a
fingernail or other pointy object when sliding the
latch to get a better grip.
2. Installing the Battery
Insert the lithium-ion battery into the battery
compartment with the metal contacts facing the
inside of the camera. The battery can only be
inserted one way.
3. Installing the microSD card
Insert a microSD card to record and store your
videos and photos. When the battery is low,
media stored on the microSD card will not be
erased. Please insert a microSD card by following
the steps below:
1) Open the battery door.
2) Insert a microSD card. Ensure that the metal
contacts are inserted first. Push the microSD
card down until you hear an audible click.
The microSD card can only be inserted in one
way. Do not force the card in if it will not go in
smoothly.
3) Close the battery door by pushing it down and
sliding the lock back into place. To remove the
microSD card, simply push in and the card will
pop up.
Note :
• Please format the microSD card before using
the camera (Caution, this will erase all data on
the card).
• Do not remove or insert the microSD card when
recording. It may damage the card or cause
data loss.
• MicroSD card rating must be Class 10 or above.
After closing the battery door, make sure that
the door is closed securely and the lock is
engaged.
4. Charging the Battery
Connect your camera with an AC adaptor and the
USB cable. Insert the small end of the USB plug
into the camera port under the battery door, and
the larger end into the AC adaptor. While charging
the LED indicator light will light up solid red, when
finished charging the light will turn off.
5. Powering the Camera On/Off
Connect your camera with an AC adaptor and the
USB cable. Insert the small end of the USB plug
into the camera port under the battery door, and
the larger end into the AC adaptor. While charging
the LED indicator light will light up solid red, when
finished charging the light will turn off.
1) Press and hold the Power button for 3 seconds
to power the camera on. To power the camera
off, press the Power button again.
2) If the camera’s battery is low, a “Low Power”
message will display on the screen and it will
automatically shut down within a few seconds to
prevent memory corruption or loss.
6. Formatting the Camera
1) Power on the camera, in Photo or Video mode,
press the MENU Button to the main menu. Press
the Up or down Button to switch to the System
Settings menu. Press the Right Button, then
press the Down Button to find format sub menu.
2) Press the Down Button to “Format”, press Mode/
OK Button to enter, and choose “OK”. Press the
Left or Right Button to choose “Yes (or No)”, and
press Mode/OK Button to confirm formatting.
Note: Formatting will delete all files stored on the
microSD card. If you do not want to delete them,
please either download them to your computer or
use a fresh card.
EN
5
BUTTONS AND FUNCTIONS
Photo Capture Button (Photo Mode)
Power on the camera, camera default is Photo
Mode. In Photo Mode, Press T/W Button to move
digital Zoom Slider to zoom in and out. Press
Shutter Button to capture the image.
Video Capture Button (Video Mode)
In Photo Mode, press the Mode Button to choose
Video Mode. Press Shutter Button to start
video capturing and press it again to complete
the video capture. Record video: during video
recording, move the T/W digital Zoom Slider to
zoom in and out.
Playback Button (Playback Mode)
In Photo Mode or Video Mode, pressing the
Playback Button, can direct you to Playback
Mode. Press the button again to exit. When
reviewing a video, press the Shutter Button to
start playback. Press the Shutter Button to pause
or continue video playback.
Delete Button
In Playback Mode, press Delete Button to quickly
delete an image/video. Press Up or Down Button
to select Yes/No. Press Mode/OK Button to
confirm the selection.
SHOOTING MODE
In the photo or video mode, press the Mode/
OK button to enter the shooting mode selection,
press the Left or Right buttons to select
the mode.
•
Slow Photography: After entering the slow
photography mode and starting to record,
you can record the slow motion camera effect;
the shooting size and rate can be set in the menu.
• Loop Recording: Entering loop recording, and
start to record, you can record video after video,
each video time can be set in the menu.
• Time-lapse video: Turn on the time-lapse video
(interval video: take one frame every xx seconds
and compose a video, the interval time can be
set in the menu) and start recording. Can record
time-lapse interval video.
• Automatically take pictures: Turn on automatic
taking pictures (interval taking pictures) and
press the camera button to start taking
pictures. The camera will automatically take a
picture at an interval and then press the camera
button again to end the automatic picture.
The interval time can be set in the menu).
MENU (Menu settings)
In photo or video mode, press the MENU Button
to enter the menu interface, press the Up and
Down Button to switch the shooting menu or set
menu, press the Right Button to enter the sub-
menu, press the Up or Down Button to select the
required sub-menu and press Mode/OK Button to
confirm. Press MENU to exit the menu.
Language Setting
This function allows you to set the camera’s
interface language.
1) In Photo Mode press the MENU button.
2) Press Up or Down Button to Select
the Gear Icon.
3) Press the Right Button to enter the setup menu.
4) Select ‘Language’ using the Up or Down
Button and press the Mode/OK button to enter
the ‘Language’ menu.