Znaleziono w kategoriach:
Piekarnik CANDY FIDC N615 1 Elektryczny parowy Czarny A+

Instrukcja obsługi Piekarnik CANDY FIDC N615 1 Elektryczny parowy Czarny A+

Powrót
CANDY HOOVER GROUP Via Comolli 16 Brugherio – Italy
User Instructions
OVENS
2EN
Instrukcje użytkownika
PIEKARNIKI
16PL
EN 2
Safety Indications
General Instructions
Product description
Display description
Cooking Modes
General notes on cleaning
Maintenance
Troubleshooting
Installation
Summary
3
7
9
10
12
13
13
15
30
EN 3
During cooking, moisture may condense inside the oven cavity
or on the glass of the door. This is a normal condition. To reduce
this eect, wait 10-15 minutes after turning on the power be-
fore putting food inside the oven. ln any case, the condensation
disappears when the oven reaches the cooking temperature.
Cook the vegetables in a container with a lid instead of an open
tray.
Avoid leaving food inside the oven after cooking for more than
15/20 minutes.
WARNING: the accessible parts can become hot when the oven
is in use. Young children should be kept at a safe distance.
WARNING: the accessible parts can become hot when the grill
is in use. Children should be kept at a safe distance.
Disconnect the appliance from the mains electricity supply be-
fore carrying out any work or maintenance.
WARNING: in order to avoid any danger caused by the acciden-
tal resetting of the thermal interruption device, the appliance
should not be powered by an external switching device, such as
a timer, or be connected to a circuit that is regularly switched on
and o.
Children under 8 should be kept at a safe distance from the ap-
pliance if not continuously supervised.
Children should not play with the appliance.
The appliance can be used by those aged 8 or over and by those
with limited physical, sensorial or mental capacities, without
experience or knowledge of the product, only if supervised or
provided with instruction as to the operation of the appliance,
in a safe way with awareness of the possible risks.
Cleaning and maintenance should not be carried out by unsu-
pervised children.
Do not use rough or abrasive materials or sharp metal scrapers
to clean the oven door glasses, as they can scratch the surface
Safety Indications
EN 4
and cause the glass to shatter.
The oven must be switched o before removing the removable
parts. After cleaning, reassemble them according the instruc-
tions.
Only use the meat probe recommended for this oven.
Do not use a steam cleaner or high pressure spray for cleaning
operations.
IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH-
OUT PLUG:
THE APPLIANCE MUST NOT BE CONNECTED TO THE POW-
ER SOURCE USING PLUG OR SOCKETS, BUT MUST BE DI-
RECTLY CONNECTED TO THE SUPPLY MAINS. The con-
nection to the power source must be carried out by a suitably
qualied professional. In order to have an installation compliant
to the current safety legislation the oven must be connect-
ed only placing an omnipolar breaker, with contact separation
compliant to the requirements for overvoltage category III,
between the appliance and the power source. The omnipolar
breaker must bear the maximum connected load and must be
in line with current legislation. The yellow-green earth cable
should not be interrupted by the breaker. The omnipolar break-
er used for the connection must be easily accessible when the
appliance is installed.
The connection to the power source must be carried out by a
suitably qualied professional considering the polarity of the
oven and of the power source.
The disconnection must be achieved incorporating a switch in
the xed wiring in accordance with the wiring rules
IF THE OVEN IS PROVI ED BY THE MANUFACTURER WITH
PLUG:
The socket must be suitable for the load indicated on the tag
and must have ground contact connected and in operation.
The earth conductor is yellow-green in colour. This operation
should be carried out by a suitably qualied professional. ln case
EN 5
of incompatibility between the socket and the appliance plug,
ask a qualied electrician to substitute the socket with another
suitable type. The plug and the socket must be conformed to
the current norms of the installation country. Connection to the
power source can also be made by placing an omnipolar break-
er, with contact separation compliant to the requirements for
overvoltage category III, between the appliance and the pow-
er source that can bear the maximum connected load and that
is in line with current legislation. The yellow-green earth cable
should not be interrupted by the breaker. The socket or omnip-
olar breaker used for the connection should be easily accessi-
ble when the appliance is installed.
The disconnection may be achieved by having the plug accessi-
ble or by incorporating a switch in the xed wiring in accordance
with the wiring rules.
lf the power cable is damaged, it should be substituted with a
cable or special bundle available from the manufacturer or by
contacting the customer service department. The type of pow-
er cable must be H05V2V2-F. This operation should be carried
out by a suitably qualied professional. The earth conductor
(yellow-green) must be approximately 10 mm longer than the
other conductors. For any repairs, refer only to the Customer
Care Department and request the use of original spare parts.
Failure to comply with the above can compromise the safety of
the appliance and invalidate the guarantee.
Any excess of spilled material should be removed before clean-
ing.
A long power supply failure during an occurring cooking phase
may cause a malfunction of the monitor. ln this case contact
customer service.
The appliance must not be installed behind a decorative door in
order to avoid overheating.
When you place the shelf inside, make sure that the stop is di-
rected upwards and in the back of the cavity. The shelf must be

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 40 618 750 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756