Znaleziono w kategoriach:
Radio DENVER DAB-18 Cyfrowe Czarny

Instrukcja obsługi Radio DENVER DAB-18 Cyfrowe Czarny

Powrót
Instruction Manual
DAB+ / FM / Bluetooth / Aux-in Radio
DAB-18
denver.eu
ENG 1
ENG 2
English
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
Warning:
1. Do not install this equipment in a confined or building-in space such as a book case or similar
unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded
by covering the ventilation openings with items such as newspaper, table-cloths, curtainsetc.
2. WARNING: Only use attachments/accessories specified or provided by the manufacturer (such
as the exclusive supply adapter, batteryetc).
3. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with
liquids, such as vases, shall not be placed onapparatus.
4. WARNING: The batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or thelike.
5. WARNING: The direct plug-in adapter is used as disconnect device, the disconnect device shall
remain readily operable.
6. Correct Disposal of this product. This marking indicates that this product should notbe
disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. Toreturn your used device, please use
the return and collection systems or contact the retailer where the product was purchased.
Safety information
Please read the safety instructions carefully before using the product for the first time
and keep the instructions for future reference.
1.
This product is not a toy. Keep it out of reach ofchildren.
2.
Keep product out of the reach of children and pets to avoid chewing and swallowing.
4. Product operating and storage temperature is from 0 degree Celsius to 40 degree
Celsius. Under and over this temperature might affect the function.
6.
Never open the product. Touching the inside electrics can cause electric shock. Repairs or service
should only be performed by qualified personnel.
7.
Do not expose to heat, water, moisture, direct sunlight!
8.
Please protect your ears against loud volume. Loud volume can damage your ears and risk in
hearing loss.
9.
Bluetooth wireless technology operates within a range of about 10 m (30 feet). The maximum
communication distance may vary depending on the presence of obstacles (people, metal objects,
walls, etc.) or the electromagnetic environment.
10.
Microwaves emitting from a Bluetooth device may affect the operation of electronic medical
devices.
11.
The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric
shock. If water or a foreign object enters the unit, stop use immediately.
6.
Only charge with supplied Adaptor. The direct plug-in adapter is used as disconnect device, the
disconnect device shall remain readily operable. So, make sure there is space around the power
outlet for easy access.
7.
Do not use non original accessories together with the product as this can make the product
functionality abnormal.
ENG 3
ENG 4
LOCATION OF CONTROLS
1 2 3 4 5 6 7 8 9 10
1.
Volume knob
2.
Speakers
3.
Standby
4.
Scan button
5.
Preset button
6.
LCD display
7.
Info button
8.
Alarm set button
9.
DAB/FM/AUX/BLUETOOTH
10.
Tune/Select knob
11.
Antenna
12.
Battery compartment
13.
AUX in jack
14.
DC jack
Remove old or discharged batteries from the product. Remove the batteries when the product will not
be used for extended periods of time to prevent damage due to rusted or corroded batteries.
Never throw batteries into a fire, do not expose batteries to fire or other heat sources.
Battery Disposal: Old or discharged batteries must be properly disposed of and recycled in compliance
with all applicable laws. For detailed information, contact your local solid waste authority.
Follow the battery manufacturer’s safety, usage, and disposal instructions.
OPERATION
Press the Power button to turn the unit on.
IN DAB MODE
Press the DAB/FM/AUX/BT button to select DAB radio mode
Auto select : Press the SCAN button, “SCANNING will show on the display, and the number of DAB
station will shown on the upper right corner, and it will automatically play the first station. Tune and
press the TUNE/SELECT knob to choose the next or previous station.
Manual select: Press and hold the INFO button and tune the “TUNE/SELECT knob until the “MANUAL
TUNE” icon shown on the display, then tune the TUNE/SELECT knob to choose the station.
Note: you many have to wait for the unit to tune in to the new channel.
DAB Radio stations presetting:
To receive the desired DAB station, press and hold the PRESET button, “Preset Store” “<1: (Empty)>
will appear on the display,
Tune the TUNE/SELECT knob to choose your desired program number (1-10) you want stored to.
Then press TUNE/SELECT knob to store it.
Repeat the same procedures until all the desired radio stations were stored into the program list.
Recall the memory, press PRESET button and tune the TUNE/SELECT knob to select the stored radio
station as desired. Press the TUNE/SELECT knob toconfirm.
IN FM MODE
Press the DAB/FM/AUX/BT button to select FM radio mode, press the SCAN button, when a radio is
found, the frequency on display will stop running and start playback automatically.
If reception is no good, tune the TUNE/SELECT knob to fine tune. FM radio presetting is same as DAB
radio presetting
INFO Button
A. The UNIT has DAB information modes which are shown on the bottom line of the display. Long
press the INFO key and tune “TUNE/SELECT” knob to see the available types, press “INFO to
turn back.
1. Full Scan
Full scan the DAB radio channels
2. Manual Scan
Scan the DAB radio channels manually
3. Dynamic range compression (DRC) (Off/ High/ Low)
This function reduces the difference between the loudest and quietest audio being broadcast.
Effectively, this makes quiet sounds comparatively louder, and loud sounds comparatively quieter.
ENG 5
ENG 6
NoteDRC only works if it is enabled by the broadcaster for a specific station.
4. Station Order
The station order can be by alphanumeric or ensemble .
5. Prune (Yes/No)
Yes- this removes all invalid stations.
No- Keep all stations.
6. System
Time
. Set Time/Date
. Auto Update
. Set 12/24 hour format
. Set Date format
Backlight
. Timout
. On level
. Dimmer level
Languages
Factory Reset
Choose “YES to clear all settings
SW version
B. The UNIT has FM information modes which are shown on the bottom line of the display. Long press
the INFO key and tune “TUNE/SELECT knob to see the available types, press “INFO” to turnback.
1. Scan Setting
To select the Strong stations or All stations.
2. Audio Setting
To select Forced mono or Stereo allowed
3. System
Time
. Set Time/Date
. Auto Update
. Set 12/24 hour format
. Set Date format
Backlight
. Timout
. On level
. Dimmer level
Languages
Factory Reset
Choose “YES to clear all settings
SW version
ALARM 1 SETTINGS
Alarms will only function when the unit is On (mains or battery power) or in Standby mode (Mains
power only).
Alarms can be switched on or off in standby mode (see below), however, the alarm parameters can
only be set when the unit is on.
To setalarms
Turn the uniton.
To set or change alarm 1, press “ALARM” once, then press “TUNE/SELECT”. To set or change alarm
2, press “ALARM” twice, then press ”TUNE/SELECT”. To exit alarm setting mode, press “ALARM”
again.
The alarm setup prompts you for the following parameters. Select a value for each parameter in turn
turning the “TUNE/SELECT” knob and press “TUNE/SELECT” to confirm and move on to the next
parameter.
Parameters
On time hours and minutes
Duration–15 | 30 | 45 | 60 |90minutes
If the alarm is not cancelled the unit returns to standby after this time period.
Source– Buzzer/ DAB/ FM
If DAB or FM is chosen as the audio source you will also be prompted to select the Last played station
or one of the preset stations (if set).
Daily | Once | Weekends | Weekdays
Choose the days on which the alarm isactive.
Note: if you choose ‘Once’, you are prompted to enter the required date.
Alarm–Off | On
USING THE AUX INPUT
Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3 player
to the AUX input jack.
Press the DAB/FM/AUX/BT button to select AUX mode, “Auxiliary Input” will show on the LCD.
Turn on your Personal Player to begin playing, adjust the volume to desire listening level.
IN Bluetooth MODE
Press the DAB/FM/AUX/BT button to select BLUETOOTH mode
To pair the radio with your phone:
Turn on the Bluetooth function in the phone or tablet. For instructions, see your mobile phone user
guide.
a. Place the phone within 20 cm (8 inches) of theradio.
b. Please make sure the radio is in BT mode. Choose “DAB-18” on your phone to connect the
radio Bluetooth. After connected, your phone will show “BTConnected”.
c. Enjoy your music with the radio now!
ENG 7
ENG 8
Hereby, Denver A/S declares that the radio equipment type DAB-18 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: denver.eu and then click the search ICON on topline of website. Write modelnumber: DAB-
18.Now enter product page, and red directive is found under downloads/other downloads
1. Operating Frequency Range: FM 87.5-108.0MHz, DAB174-240MHz
2. Max Output Power: 2 x 2W
3. Bluetooth frequency: 2.45 GHz.
EN
Manufacturer’s name or trade mark,
commercial registration number and address
Blue Iron Holdings Limited
Suite Q, 18/F, International Industrial Centre,
2-8 Kwei Tei Street, Fotan, Shatin, NT,
Hong Kong
68231699-000-09-19-5
Model identifier
BI12T-050100-BdV
Input AC frequency
100-240V
Input voltage
50Hz
Output voltage
5V
Output current
1A
Output power
5W
Average active efficiency
73.78%
Efficiency at low load (10%)
65.90%
No-load power consumption
0.082W
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment contains materials, components and substances that can be
hazardous to your health and the environment, if the waste material (discarded electric and electronic
equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This
symbol signifies that electric and electronic equipment should not be disposed of with other household
waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can either be
submitted free of charge at recycling stations and other collection sites, or be collected from the
households. Additional information is available at the technical department of your city.
DENVER A/S
Omega 5A, Soeften
8382 Hinnerup
Denmark
Denver.eu
facebook.com/Denver.eu

Właściciel serwisu: TERG S.A. Ul. Za Dworcem 1D, 77-400 Złotów; Spółka wpisana do Krajowego Rejestru Sądowego w Sądzie Rejonowym w Poznań-Nowe Miasto i Wilda w Poznaniu, IX Wydział Gospodarczy Krajowego Rejestru Sądowego pod nr KRS 0000427063, Kapitał zakładowy: 40 618 750 zł; NIP 767-10-04-218, REGON 570217011; numer rejestrowy BDO: 000135672. Sprzedaż dla firm (B2B): dlabiznesu@me.pl INFOLINIA: 756 756 756