Znaleziono w kategoriach:
BLUETOOTH SPEAKER
XS-E114B
INSTRUCTION MANUAL
NÁVOD K POUŽITÍ
INSTRUKCJA OBSŁUGI
NÁVOD NA POUŽITIE
HASZNÁLATI UTASÍTÁS
MANUAL DE INSTRUCȚIUNI
РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ
EN
CZ
PL
SK
HU
RO
BG
EN
INTRODUCTION
Thank you for buying our product. Please read through these operating
instructions, so you will know how to operate your equipment properly.
After you nished reading the instructions manual, put it away in a safe
place for future reference.
IMPORTANT SAFETY PRECAUTIONS
When using your Speaker, basic safety precautions should always be
followed, including the following:
• Children should be supervised to ensure that they do not play with
the device.
• Keep this Speaker and its accessories away from excessive heat.
• No sharp object should be subjected to the speaker/speaker-drivers
as it may damage the speakers.
• Only use a soft cloth, no harsh abrasives or chemicals to clean, as it
may damage the surface finishing.
• Keep away from dripping or splashed fluids.
• Ensure the speaker is waterproof by removing all the connected
cables and the cap is tightly closed before exposing the speaker to
liquid.
• NEVER expose the speaker to water while charging, as doing so may
result in damage to the speaker or the power source.
• NEVER operate this speaker with a damaged cable or after it has
malfunctioned or has been damaged in any manner.
• NEVER leave the speaker unattended while charging. If the speaker
becomes hot, smokes, or gives off an odor during charging, terminate
charging immediately.
TO AVOID DANGER OF SUFFOCATION, KEEP
THE PLASTIC BAG AWAY FROM BABIES AND
CHILDREN. DO NOT USE THIS BAG IN CRIBS,
BEDS, CARRIAGES OR PLAYPENS. THIS BAG
IS NOT A TOY.
EN
PRODUCT OVERVIEW AND CONTROL BUTTONS
1. button
Long press to turn on/off the speaker.
Press to switch mode (BT / FM / USB).
2. LED indicator
3. button
BT/USB: Press to start/pause playback.
FM: Press to mute/unmute listening. Long press to search and save
the radio stations automatically.
Press twice to switch LED light mode.
4. USB port
5. USB-CTM charging port
6. button
Press to increase the volume.
BT/USB: Long press to skip to the next track.
FM: Long press to skip to the next saved station.
7. LED light
8. button
Press to decrease the volume.
BT/USB: Long press to skip to the previous track.
FM: Long press to skip to the previous saved station.
USB Type-CTM and USB-CTM are trademarks of USB Implementers Forum.
CHARGING
Before rst-time use, fully charge the built-in battery. The charger is not
included in the package, please charge the speaker via a standard
5 V / 1 A charger or via a PC. The LED light will ash red during
charging. The LED light will glow red when the speaker is fully charged.
NOTE: The speaker will notify “battery low” when the battery is low.
IMPORTANT: Please make a complete charge every three months to avoid
shortening the battery lifespan.
BLUETOOTH
• Long press the button to turn on the speaker. The LED indicator
will flash blue. The speaker is in pairing mode.
• Activate Bluetooth of mobile phone and search for device name
“XS-E114B”, then connect it. If the pairing is successful, you will
hear the voice prompt “connected”, and the LED indicator will be
solid blue.
EN
NOTE: The speaker will automatically shut down after 20 minutes in pairing
mode if no devices are paired. When the volume reaches the maximum level,
you will hear a “beep” voice prompt.
Disconnecting the paired mobile phone
Long press the button to disconnect the current device.
The LED indicator will ash blue and the speaker will be in pairing mode.
FM
Long press the button to search and save the radio stations
automatically. The LED indicator will ash during the search. When the
search is complete, the LED indicator will be solid blue.
NOTE: LED light modes are not available in FM mode.
USB
Insert the USB drive into the speaker. The speaker will start playing the
saved music automatically.
NOTE: The speaker supports USB drives (FAT32) with up to 32 GB.
The speaker supports MP3 audio format.
Do not use any USB extension cable for connecting the USB drive.
The USB port does not support charging.
TWS (TRUE WIRELESS STEREO)
The TWS technology enables you to use two speakers pairing via
Bluetooth to create a wireless dual-channel system to deliver true stereo
sound eect.
• Turn on both speakers. Make sure both speakers are without any
Bluetooth connection.
• Long press the and buttons together on one of the speakers,
the second speaker will connect automatically. You will hear the voice
prompt “TWS paired”.
• The first speaker LED indicator flashes blue and the LED indicator of
the second one keeps solid red.
• Pair your mobile phone with the first speaker, the LED indicator will
be solid blue.
Disconnect the TWS connection
Long press the and buttons together on one of the speakers to
disconnect the TWS pairing.
NOTE: TWS function only works in Bluetooth mode.