-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
- 1 -
User manual
LAMAX C3
EN DE CZ SK PL HU BG LT SL HR
- 1 -
1
2
3
45
8
6
7
Introduction
Thank you for purchasing the LAMAX C3 car camera. You are now the owner of a reliable compa-
nion for your car journey. A complete multilingual manual can be downloaded from the product
page at www.lamax-electronics.com.
LAMAX C3 car camera features and functions
- Interpolated full HD video 1920 x 1080
- G-sensor
- Loop recording
- Parking mode
- Motion sensor
- Multilingual menu
- LED light
- Video lock at the touch of a button
Pack contents
- LAMAX C3 car camera
- Power cable
- USB cable
- Camera suction mount
- Camera 3M stick mount
- Manual
Product picture
1. ON/OFF
2. Menu
3. OK (shutter)
4. Down arrow
5. Up arrow
6. Mode
7. Parking mode
8. Micro SD card slot
HR SL LT BG HU PL SK CZ DE EN
- 2 -
Product installation
1) Connect the power cable to the cigarette lighter. Ensure the cable is placed around the wind-
screen so as not to obstruct the driver's view and then x it securely in place. Attach the device
between the glass and the mirror. This will give you the optimal picture.
2) Do not install in a position which obstructs the driver's view or distracts them.
3) Some vehicles continue to supply power to the cigarette lighter, even when the engine is turned
o. In this case, before leaving the vehicle, unplug the cable from the cigarette lighter.
4) When using the device for the rst time, the battery may be low. If you cannot switch on the
device due to low power, manually connect the external power cable to charge the battery.
5) Use only a high-quality micro SDHC card of class 10 or higher. For optimal recording use, we
recommend cards with a capacity of at least 8GB up to a maximum of 32GB. If this is the rst use
of the card, we recommend formatting it rst.
Quick functions
1) LED light – tap the “ON/OFF” button.
2) Parking mode – hold the “PARKING MODE” button.
3) Switch OFF screen – tap the “PARKING MODE” button.
4) Audio recording – tap the “UP” arrow.
5) File lock – when recording video, lock the current recording by tapping the “MODE” button.
Icons annotation
Lenght of the loop Exposure Value
Video Mode Photo Mode
Voice ON Voice OFF
LED light Camera is Powered
Parking Mode Memory Card Detected
G-sensor Photo Burst
Using the LAMAX C3 car camera
1) Inserting a micro SDHC card
Insert or remove the micro SDHC card from the card slot only when the camera is turned o and
not connected to a computer or power supply.
2) Power
a) Camera can be powered using a USB cable connected to a computer or using the car cigarette
lighter.
b) Camera is designed to be powered continuously. Built-in battery can not be removed or repla-
ced.
c) Integrated battery is primarily for use in parking mode.
3) Turning the camera on and o
a) To switch on the camera, press the ON/OFF button.
b) Cameras automatically turns on when connected to a power supply.
c) To switch o the camera, press and hold the ON/OFF button for 3-5 seconds.
EN DE CZ SK PL HU BG LT SL HR
- 3 -
d) Camera automatically turns o after disconnecting the power supply.
4) Changing modes and menu navigation
a) Repeatedly tap the “MODE” button to toggle between video/camera/gallery.
b) Camera menu has 3 sections – basic camera settings/video conguration/photo settings. To
toggle between these use the “MENU” button, which also serves to access the menu. Under each
section move vertically using the “UP” and “DOWN” arrows and select by pressing “OK”.
c) To independently change the settings in video/photo mode, you must access the settings from
the relevant mode. Therefore, you can only enter video settings in video mode and photo se-
ttings in photo mode.
d) To go back a level use the “MENU” button. To completely exit the setting, press the “MODE”
button.
5) Recording / taking photos / gallery
a) To start the camera recording press the “OK” button. Press it again to stop recording. The camera
must be in record mode.
b) Automatic recording – the automatic recording function is always enabled. Automatic recor-
ding starts after connecting the camera to a power supply. If the car's power only starts after
the ignition is turned on then the camera turns on and starts recording when the car is started.
c) Automatically start/stop recording – the camera automatically stops recording and turns o
after the engine is turned o and the power cut. In some cars the cigarette lighter is powered
permanently. In this case, be sure to unplug the cable from the cigarette lighter.
d) Take photos by pressing the “OK” button. The camera must be in photo mode.
e) After switching to the gallery, which displays a list of recorded videos and photos, navigate
between these using the “UP” and “DOWN” arrows. To start and stop a recording press the “OK”
button.
6) Deleting the entries on the camera
a) Deleting material directly on the camera – can be done in the gallery. After pressing the “MENU”
button, select “Delete” and then “Current image”.
b) Deleting all entries – can be done in the gallery. After pressing the “MENU” button, select “Dele-
te” and then “Delete all”.
7) Protecting the les on the camera.
a) Locking the current entry – can be done in the gallery. After pressing the “MENU” button, select
“Lock” and then “Lock the current image”.
b) Locking all entries – can be done in the gallery. After pressing the “MENU” button, select “Lock”
and then “Lock all images”.
c) Unlocking the current entry – can be done in the gallery. After pressing the “MENU” button,
select “Lock” and then “Unlock current image”.
d) Unlocking all entries – can be done in the gallery. After pressing the “MENU” button, select “Lock”
and then “Unlock all images”.
8) Connecting to a PC
Camera can be connected to a PC via the supplied mini USB cable and use it as USB storage.
HR SL LT BG HU PL SK CZ DE EN
- 4 -
LAMAX C3 car camera settings – video mode
1) Video resolution
Video resolution can be set in the video settings menu. The video settings menu is accessed by
pressing “MENU” in video mode. Use the “UP” and “DOWN” arrows to scroll to “RESOLUTION” and
choose one of the options – 1920x1080, 1440x1080, 1280x720, 848x480 or 640x480.
2) Exposure
Lets you adjust the exposure as needed. Video recording exposure can be adjusted from -2 - +2 in
steps of 1/3.
3) Motion detection
When motion detection is activated it automatically starts recording the moment movement is
detected in the visual eld of the lens. The camera stops recording after motion ceases.
4) Audio recording
Lets you disable audio recording and prevent unwanted audio recordings. Audio recording can
also be turned on and o using a quick function.
5) Display data
Date and time can be inserted into the recording.
6) G-sensor
Connected to other functions of the car camera. It can be set to dierent sensitivity levels (2G, 4G,
8G), with the highest sensitivity being 2G and the lowest 8G. Setting the correct sensitivity aects
other functions of the camera. For the correct functioning of “Parking mode”, we recommend a
higher sensitivity for recording minor impacts (parking, vandalism).For the proper functioning of
le lock, we recommend a lower sensitivity to minimise the unwanted locking of les, for example
when driving on uneven terrain. The icon indicating that the G-sensor is turned on is on the left
of the display.
LAMAX C3 car camera settings – photo mode
1) Image resolution
Image resolution can be set in the photo settings menu. The photo settings menu is accessed by
pressing “MENU” in photo mode. Use the “UP” and “DOWN” arrows to scroll to “RESOLUTION” and
choose one of the options – 12 MP, 10 MP, 8 MP, 5 MP, 3 MP, 2 MP, 1.3 MP and VGA.
2) Photo burst
Allows a series of 5 shots to be taken in 1 second at the touch of a button.
3) Exposure
Adjusts exposure as needed. The photo exposure can be adjusted from -2 - +2 in steps of 1/3.
4) Preview
View a photo on the display immediately after the shot has been taken, without having to switch
to the gallery. Display time can be set to 2 or 5 seconds or o completely.
5) Display data
Inserts date and time when taking a photo.
LAMAX C3 car camera basic settings
1) Parking mode
Turn on parking mode and the camera starts recording when there is a collision or attempted
break-in. It can be set to dierent sensitivities (2G, 4G, 8G), with the highest sensitivity being 2G
EN DE CZ SK PL HU BG LT SL HR
