Znaleziono w kategoriach:
Listwy zasilające (10)
Wróć
SMART Wi-Fi POWER STRIP
3 X UNI-SCHUKO OUTLET 4 USB PORT
LISTWA SMART Wi-Fi
3 X GNIAZDO SCHUKO 4 PORTY USB
MANUAL / INSTRUKCJA OBSŁUGI
Stable Wi-Fi 2.4GHz connection is required for the device to work
properly.
Aby urządzenie działało poprawnie, wymagane jest stabilne
połączenie Wi-Fi 2.4GHz.
MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP
| ENG / pl
2
Contents
A. Safety precautions .................................................................... 2
B. Product description ................................................................... 3
C. Product introduction and elements description ....................... 3
D. Installation ................................................................................ 4
E. Power ........................................................................................ 4
F. Power strip default settings reset ............................................. 4
G. Using TuyaSmart app ................................................................ 5
H. Pairing with TuyaSmart app ...................................................... 8
I. Available settings for devices added via TuyaSmart................ 11
J. Product specification ............................................................... 12
K. Warranty ................................................................................. 13
A. Safety precautions
1. Do not plug this power strip into an existing surge protector
or power strip. This practice is called "daisy chaining" or
"piggy backing" and can lead to serious problems.
2. If at any time the power strip or plug strip is too hot, remove
and replace the unit. The electrical load for this strip should
be evaluated for overloading.
3. This device is for indoor use only. Operating temperature
should be within -20-60°C. Avoid direct contact with water,
MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP
| ENG / pl
3
as it will cause serious damages, render the product useless
or even threaten the life of user.
4. Stable Wi-Fi connection – 2.4Ghz band is required for the
device to work properly.
5. Please contact the seller / distributor for assistance, if there
is any problem with this product. Do not try to disassemble
or repair the product yourself, without authority.
6. Please do not short-circuit the product.
7. Dispose of the product properly. It should be disposed along
with electronic waste.
B. Product description
Thank you for purchasing Lanberg Smart power strip.
The following product is an intelligent, easy-to-install power strip
with 3 Uni-Schuko (Type-F) outlets (10A) and 4 USB ports (each
2.4A max.).
Every single available outlet, port can be managed remotely via
“TuyaSmart” app.
C. Product introduction and elements description
What is inside of the box?
Packaging contains: Smart power strip × 1, Manual × 1, Plastic pin
cover x 1.
MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP
| ENG / pl
4
D. Installation
1. Take Lanberg Smart power strip out of the packaging.
2. Connect the product to mains (AC). Do not connect this
power strip to another surge protector / power strip.
3. To pair this Lanberg device with “TuyaSmart” app follow the
instructions from point H: Pairing with TuyaSmart app.
Important note:
Do not install in places with direct contact with water or liquid-
based substances. Any exposure to them may lead to serious
product damage or render the Smart power strip useless.
E. Power
Before using Lanberg Smart power strip, connect it to the AC
power source (mains / wall-mount outlet etc.). The required
power is: 100-240V AC, 50-60Hz.
F. Power strip default settings reset
ON / OFF switch found on the power strip’s panel can also
be used as a Reset button. To do it press and hold it for at least
5 seconds. If the power switch starts flashing the operation was
successful.
MANUAL –SMART WI-FI POWER STRIP
MANUAL –SMART WI-FI POWER STRIP
| ENG / pl
5
G. Using TuyaSmart app
Lanberg Smart power strip supports external mobile devices,
such as smartphones, tablets etc., with iOS 10.0 / Android 5.0
operating systems or newer.
App can be downloaded in two ways:
1. Download the App from Google Play or App Store.
a. Android mobile device: Type and search “TuyaSmart” in
Google Play.
b. iOS mobile devices: Type and search “TuyaSmart” in App
Store.
2. Use the QR code, on the next page, available for devices
with the iOS or Android operating systems.
Important note: After scanning the QR code,
the default browser window will open (e.g.
Safari). In the newly opened window, click
"Download" and then select the option to
open using the
App Store / Google Play to download the
application.