-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
KITCHEN EXTRACTOR HOOD
OKAP KUCHENNY WENTYLACYJNY
HIT LINE
VETRO
USER’S MANUAL
INSTRUKCJA OBSŁUGI
Dear customer!
Thank you for choosing the products of the brand "SEENERGY". We put our best efforts so you were
satisfied with your choice.
1. GENERAL INFORMATION
1.1 Prior to installing the extractor hood carefully read our recommendations, following which will
provide safe work of the appliance. Save this User’s manual, as it contains answers to the questions which
may arise later.
BEFORE STARTING THE OPERATION (SWITCHING ON) THE APPLIANCE MUST BE HELD
AT THE ROOM TEMPERATURE FOR AT LEAST TWO HOURS.
1.2. This appliance is intended for extraction of polluted air from the space above the cooking appliance,
and intended for domestic use and the household environment only and meets the requirements of State
Standard of Ukraine ДСТУ IЕС 60335-2-31:2006.
USE OF THE APPLIANCE IN GOALS OTHER THAN DOMESTIC IS FORBIDDEN. THE RISK
OF INJURY AND PROPERTY DAMAGE INCREASES IN CASE OF USE OF THE EXTRACTOR
HOOD WITH PURPOSES OTHER THAN INTENDED, WHAT WILL LEAD TO WARRANTY
CANCELLATION/
1.3. Use of the extractor hood decreases the content of harmful products of incomplete combustion of
natural gas, as well as odors produced during cooking in the air, and prevents pollution of walls, ceiling, and
furniture with grease and soot.
1.4. The appliance is an air purifying device of the exhaust type with a diameter fan (turbine), completed
with a grease picking aluminum filter (included) and has the option of upgrading with a carbon odor filter. It
is manufactured from sheets of carbon steel with a decorative protective coating of powder paints - 520 mm
and 700 mm in width.
1.5. Depending on the installation scheme over the cooker, the extractor hood can work in two variants:
- in the mode of air extraction into the stationary ventilation shaft (chimney) of the kitchen using
corrugated aluminum or plastic air-ducts Ø150mm or Ø120mm (see item 5.3);
- in the recirculation mode (closed circular air circulation in the kitchen), when the extractor hood is not
connected to chimney, and the air is passed through aluminum grease filter (included) and smothering
carbon filter and is returned to the kitchen (see paragraph 5.3).
1.6. Attention! Do not start extractor hood installation before connecting it to electricity network and
checking its technical serviceability, and checking all of its functions.
1.7. We recommend that all installation works, connection, and repair of your extractor hood should be
carried only by qualified specialists professionally engaged in the execution of such works.
1.8. The manufacturer does not bear responsibility for any damages and failures, caused by incorrect
installation, operation, and repair of the extractor hood.
1.9. The manufacturer reserves the right to modify the product in order to improve its quality and
technical specifications.
1.10. Technical specifications for the extractor hood are indicated in this manual and on the label attached
to the inner surface of the body (access to it opens when the filter is removed).
Attention! The extractor hood should be installed on the wall at the distance of 500-750mm above
the electric cooker and at the distance 650-850 mm above the gas cooker.
EN
2. MAIN TECHNICAL SPECIFICATIONS
3. PARTS SUPPLIED
Item
Quantity
Kitchen extractor hood
1pcs.
Plastic pipe adapter (from Ø150 to Ø120mm)
1pcs.
Metric screw М5х35
4 pcs.
Aluminum grease filter (5-layer)
1 pcs.
User’s manual
1 pcs.
Model of kitchen extractor hood
HIT LINE VETRO
Network voltage, V
220-230
AC frequency, Hz
50
Control type
sensor
Number of operation modes
3
Rated power consumption, W
Of the motor
120 / 200
Lighting (LED)
1x6
General
126 / 200
Productivity while connecting to standard ventilation system m3/hour
268 / 650
Overall dimensions of the
extractor hood, mm
Width
520 / 700
Depth
295
Height
182 / 235
Connection size of ventilation duct, mm
Ø150 / Ø120
Weight, kg
6 - 8
Noise level, dB
max. 65,9
Protection class
I
Operation mode
S1 (long-lasting)
Electro cable type
Armoured and grounded
4. SAFETY REQUIREMENTS
ATTENTION!
IT IS FORBIDDEN TO CONNECT THE EXTRACTOR
HOOD
TO THE NETWORK OF THE ELECTRIC COOKER.
PROTECT ELECTRIC CORD FROM MECHANICAL AND
THERMAL DAMAGE.
4.1. While installing, the operation of conducting technical services, it is strictly forbidden to:
• connect the extractor hood to the electricity network with a voltage and frequency that does not
correspond to those specified in paragraph 2;
• use lighting lamps with a power output of more than 6 watts (LED);
• carry out maintenance, replace lamps, remove filters, clean the extractor hood without removing the
plug from the mains socket;
• operate the extractor hood with an open fire source, open gas burners or heating elements; Heating
elements should be always covered with dishes;
• prepare food with use of alcohol;
• leave the fryer unattended;
• operate the extractor hood with removed filters;
• connect the extractor hood to the electric network of the cooker, cut the socket of the electric cord
while installing.
ATTENTION! IT IS FORBIDDEN TO USE GAS (ELECTRIC) COOKER IF THE EXTRACTOR
HOOD IS TURNED OFF.
4.2. In order to avoid damage by electric current, the extractor hood must be plugged into a grounded
outlet.
4.3. The extractor hood connected to the separate ventilation shaft. It is forbidden to connect other
appliances to the same ventilation shaft.
4.4. Using the extractor hood together with other heating appliances (gas, oil, ovens, etc.), besides
electric, it is necessary to provide the premises, it which the extractor hood is installed with the
additional flow of the fresh air (for example to open the window).
4.5. For air extraction to the chimney use air duct Ø150 / 120mm. A smaller diameter will create
additional air resistance, which will increase noise and vibration, as well as motor overheating.
4.6. Provide timely cleaning of non-disposable aluminum removal filters, otherwise, the efficiency of the
extraction will decrease and there will be a fire hazard due to the accumulation of grease and dust in the
filter.
4.7. It is forbidden to turn on the extractor hood in case of ignition with the purpose of reduction of smoke
until complete localization of fire.
4.8. In case of ignition under the extractor hood, cover the fire with a thick cloth, disconnect the extractor
from the electric network, do not use water to extinguish a fire in the places where the electrical appliances
are located.
4.9. Protect the cord for connection to the electric network from the mechanic and thermal damages.
5. EXTRACTOR HOOD DESCRIPTION
5.1 Ventilation cooker hood «HIT LINE VETRO» is the air-cleaning device with transverse flow
exhaust fan (turbine) and kitted with aluminium grease removal filter. The device is produced with single-
engine of 520 mm or 700 mm in width of sheet carbon steel, followed by decorative protective coating with
powder paints.
5.2 The cooker hood refers to the type of “built-in” cooker hoods and is built into the kitchen furniture
set on the wall above the cooker.
5.3. Depending on the installation scheme over the
cooker, the extractor hood can work in two variants (see
item 1.5):
- in the mode of air extraction into the chimney of the
kitchen (Pic. 1).
- in the recirculation mode (Pic. 2) (closed circular air
circulation in the kitchen).
“It is necessary to consider, that when the extractor hood is on, the pressure is automatically
lowered in the enclosed room, and should be balanced with an inflow of fresh air. This may be
achieved by opening doors and windows or with use of equipment for special inflow ventilation”.
5.4 A cooker hood consists of the following parts (Pic. 3/3.1).
1 - cooker hood body
2 - air flue nozzle adopter (from Ø150 to Ø120 mm)
3 - electric cord with grounding
4 - switch of the cooker hood operation modes (sensor)
5 - decorative panel (external glass)
6 - decorative panel (internal glass)
7 - lightning lamp (LED stripe)
Distance H:
To electric cooker 500-750mm
To gas cooker 650-850mm
Pic. 1
Pic. 2
Pic. 3
Pic. 3.1
