-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
Quick Installation Guide
Wireless DSL Modem Router
© 2023 TP-Link 7106510382 REV1.4.1
For technical support, replacement services, the user guide and other information,
please visit https://www.tp-link.com/support.
Images may dier from actual products.
CONTENTS
1 / English
6 / Čeština
11 / Қазақша
16 / Polski
21 / Русский язык
26 / Slovenčina
31 / Srpski jezik
36 / Українська мова
1
English
Connect the Hardware
If you don’t need the phone service, just directly connect the modem router to the phone jack with the
provided phone cable, then follow steps 3 and 4 to complete the hardware connection.
4
PHONE
LINE
MODEM
3
1 2
DSL LAN1 LAN2 LAN3 LAN4/WAN POWER POWER
ON/OFF
WPS RESETWiFi
ON/OFF
* Image may dier from actual product. Note: If the LED status is dierent, please refer to FAQ > Q2.
Wait for 2 minutes. The Power and DSL
LEDs will be on and stable. If there is only
one LED, it will ash slowly instead.
Phone Jack
Phone Cable
Modem Router Turn on the modem router.
Power Jack
DSL Splitter
Phone(Optional)
Phone Cable
Power Adapter
English
2
Configure via Web Browser
2 Configure the modem router via a web
browser.
A Launch a web browser and type in
http://tplinkmodem.net or 192.168.1.1.
Note: If the login page does not appear, please refer to FAQ
> Q1.
http://tplinkmodem.net
B Create a password for future login attempts,
or use admin for both username and
password for some routers.
C Go to Quick Setup or Quick Start page
and follow the step-by-step instructions to
complete the initial configuration.
1 Connect your computer to the modem router
via a wired or wireless connection.
Wired
Connect your computer to the LAN (or 1/2/3/4)
port using an Ethernet cable.
DSL LAN1 LAN2 LAN3 LAN4/ WAN POWER POWER
ON/OFF
WPS RESETWiFi
ON/OFF
Wireless
Connect wirelessly by using the SSID (network
name) and Wireless Password printed on the
product label at the bottom of the modem
router.
Now you can enjoy your internet.
Ethernet Cable
3
English
If you already have a modem or your internet
comes directly from an Ethernet wall outlet, you
can switch to Wireless Router mode. Follow the
steps below and set up.
1 Connect your computer to the router (LAN
1/2/3 port) via a wired or wireless connection.
Note: The SSIDs (network names) and wireless password are
printed on the product label.
2 Configure the modem router via a web
browser.
A Launch a web browser and type in
http://tplinkmodem.net or 192.168.1.1.
Note: If the login page does not appear, please refer to FAQ
> Q1.
B Create a password for future login attempts,
or use admin for both username and
password for some routers.
Already Have a Modem?
C Go to Advanced > Operation Mode page
and switch to Wireless Router Mode, wait
until the restart finished.
Note: Skip this step if your model does not support
the operation mode function. Your model will
automatically match the network type after being
connected in step 3.
3 Connect the modem to the router’s WAN port
via an Ethernet cable.
4 Go to Basic > Internet to nish the setup.
Now you can enjoy your internet.
For more advanced settings, refer to the
User Guide on TP-Link’s ocial website at
www.tp-link.com.
DSL LAN1 LAN2 LAN3 LAN4/WAN POWER POWER
ON/OFF
WPS RESETWiFi
ON/OFF
DSL LAN1 LAN2 LAN3 LAN4/WAN POWER POWER
ON/OFF
WPS RESETWiFi
ON/OFF
Ethernet Cable
Modem Power
Adapter
http://tplinkmodem.net
