-50% na wybrane usługi i 100 dni na zwrot!
Znaleziono w kategoriach:
Electric chainsaw
Elektrische Kettensäge
Piła łańcuchowa elektryczna
GCS41
Owner’s manual
Bedienungsanleitung
Instrukcja obsługi
2
IMPORTANT INFORMATION
To achieve the highest satisfaction, enjoy the performance of the
product and learn all its features and functions, please read this
manual before using this product.
Before using the device, read the operating instructions and follow
the instructions contained therein. The manufacturer is not liable for
damages caused by the use of the device contrary to its intended use
or improper operation.
The operating manual should be kept so that it can also be used
during later use of the product.
Safety rules for machinery and electrical equipment.
The device is considered suitable for use in countries with a
moderate, evenly humid climate. It can also be used in other countries.
NOTE! Before installation or using the device, it is absolutely
necessary to read the instruction manual and, in particular, the
recommendations concerning the safety of use. Keep the manual for
inspection and pass it on to the next users of the device.
Failure to follow these safety instructions and warnings can result in
electric shock, fire or serious personal injury.
Do not allow children and adolescents to operate the device. Do not
attempt to install, maintain or use the device if you are not familiar
with the operating instructions.
This equipment is not intended to be operated by individuals with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge of the equipment, unless they have been given
supervision or instruction concerning the use of the equipment by
individuals responsible for their safety.
GCS41
Explanation of warning symbols:
1. Hazard warning. Use extreme caution.
2. Important, read the instructions and observe the warnings.
3. Use safety glasses.
4. Wear safety ear muffs.
5. Always disconnect from the power source before repair or
maintenance. Unplug the device immediately if damaged.
6. Do not use the saw in rain or high humidity conditions.
7. Hold the saw securely and operate it with both hands.
8. Observe the safety rules for kickback. Avoid cutting with the top of
the chain guide bar. If so, the saw is can rotate and may move
towards the operator in an uncontrolled manner causing a risk of
injury.
Workplace safety
Keep the work area clean and well lit. Clutter and poor lighting
contribute to accidents.
Before starting work, prepare and clean the area, remove all stones,
branches, wires, and other foreign objects that pose the risk of
tripping.
Take particular care when working on inclined terrain or slopes.
Do not use the electrically powered device in explosive
environments created by flammable liquids, gases or dusts. The may
generate sparks that can ignite dust or vapours.
Do not use the electric saw in places with an extreme risk of fire or
explosion.
The saw is not waterproof. Operating it in rain or humid
environments may result in electric shock.
3
1 2 3 4
5 6 7 8
GCS41
Children and bystanders should not be allowed in areas where an
electrically powered device is used. Distraction may result in loss of
control of the device. Leave electrically powered garden equipment
away from bystanders.
It is the operator or the user who is responsible for accidents or
hazards to other people or the environment.
Electrical safety
Connect the device only to an electrical supply of characteristics in
accordance with the information on the data plate.
The power tool plugs must match the power sockets. Never alter the
power cord plug in any way. Unmodified plugs and suitable electrical
sockets reduce the risk of an electric shock.
Avoid touching grounded or shorted to ground surfaces such as
piping, radiators, radiators and refrigerators. If parts that are grounded
or shorted to ground are touched, the risk of electric shock increases.
Do not expose electric devices to rain or humid conditions. If water
enters the power tool, the risk of an electric shock increases.
Do not tighten the connection cables. Never use the connection
cable to carry, pull electrical equipment or pull the plug out of the
socket. Keep the connection cable away from heat sources, oils, sharp
edges or moving parts. Damaged or entangled connection cables
increase the risk of an electric shock.
Before starting the work, check the power cord before starting the
work. Do not operate if the power cord or extension cord is abraded,
cut or otherwise damaged. If the power cord is damaged during use,
switch off the device and unplug it from the socket.
If the power tool is used outdoors, the connection cables should be
extended with waterproof extension cords designed to operate
outdoors. Using such an extension cord reduces the risk of an electric
shock. The cross-section area of the extension cord conductors should
be at least 1.5 mm2 when the length of the cable is less than 20 m, and
if the length of the cable is between 20 and 50 m, the minimum cross-
4
GCS41
5
section is 2.5 mm2.
A residual current protection device (RCD) must be used as
protection against shock from the supply voltage. Using the RCD
reduces the risk of electric shock. The equipment should be supplied
through an RCD with a rated current not exceeding 30 mA.
Human safety
Do not start working with a chainsaw if you feel tired or are under
the influence of alcohol, drugs or medication. Full focus is required
when using the device, be careful. A moment of inattention while
using the power tool can lead to an accident and consequently serious
injury or damage to property.
It is necessary to use personal protective equipment. Always wear
eye protection that is close to your face (according to EN 166 or other
national regulations). Wear hearing protectors due to the noise
generated by the device. It is also recommended to use protective
equipment such as a dust mask, anti-slip footwear with uppers,
protective gloves and a helmet.
Clothing should fit closely to the body. Loose clothing, jewellery, a
scarf can be caught in moving parts of the saw, which can lead to
dangerous accidents. If you have long hair it should be secured and
tightened.
When working, the device can eject various objects, sawdust, pieces
of wood at high speed. Risk of injury. It is recommended to use
appropriate clothing.
Remove all wrenches and other set-up tools before operating the
power tool. Leaving a wrench in the rotating part of the power tool
may result in an injury.
Avoid working in an unnatural body position. Adopt a correct and
stable stance to avoid the risk of loss of balance. This will allow better
control of the power tool in unpredictable situations.
Unintentional start-up should be avoided. Before lifting or moving
the device, make sure that the power cord is unplugged from the
GCS41
